User guide

Viz Engine Administrator’s Guide

To setup an HP ML350p Gen8 with a DVS board

PCI-X , PCI slots, HP ML350p Gen8

IMPORTANT! Before touching any components make sure you use an anti-static

wrist strap to prevent electrostatic discharge.

1. Disconnect the power and all other peripherals.

2. Install the video board in slot 1.

3. Install the graphic card in slot 6.

Note: Make sure that the cable connections are correctly mounted and that

they stay clear of any supplemental aerators or the aerator of the graphics

device.

4. Tidy up all cables and close the computer’s casing.

Note: Placement of cards are the same for both DVS Atomix HDMI (see Digital

Video Systems) and DVS Centaurus II

To setup an HP ML350p Gen8 with a Matrox board

PCI-X , PCI slots, HP ML350p Gen8