User guide

Viz Engine Administrator’s Guide

17 Matrox X.Open

Matrox X.Open is a USB dongle with no video outputs or inputs that you will find on

a regular video board (e.g. Matrox X.mio Series), but it has support for all the same

codecs as a typical Matrox board. It is therefore well suited for video clip playback

using the Matrox clip player for IP, DVI and/or VGA output.

Configuration History for X.Open

Matrox X.Open uses the same drivers as a typical Matrox board.

The following are the required drivers for the Matrox X.Open dongle:

• Viz 3.6.0 - current, driver version DSX.utils 9.2.2.2343