User guide

Viz Engine Administrator’s Guide

16.2.2 Configuration History for X.mio Series

This section contains information on the following topics:

• Configuration History for X.mio2 Plus

• Configuration History for X.mio2

• Configuration History for X.mio

Note: Viz Engine version 3.6.0, and on: If the driver DSX.utils 9.2.2.2343 is to

be installed, the INFO message Matrox driver mismatch may show in the Viz

Engine Console. This can be ignored.

Configuration History for X.mio2 Plus

The following are the required drivers for the Matrox X.mio2 Plus board:

• Viz 3.6.0, driver version DSX.utils 9.2.2.2343

See also the Driver and firmware versions for X.mio2 Plus

Configuration History for X.mio2

The following are the required drivers for the Matrox X.mio2 board:

• Viz 3.6.0, driver version DSX.utils 9.2.2.2343

• Viz 3.5.3, driver version DSX.utils 7.5.2.1448

Note: As the VfW codecs are included in the 7.5.2.1448 driver you need to

uninstall previous versions of the Matrox VfW codecs. Do not install any Matrox

VfW codecs in addition to the already installed drivers.

• Viz 3.5.0 - 3.5.2, driver version DSX.utils 7.5.2.447 (SP2)

• Viz 3.3.x, driver version DSX.utils 7.5.2.443

• Viz 3.2.2, driver version: DSX.utils 5.0.3.171

Note: DSX.utils 5.0.3.171 is required on Windows XP SP3.

• Viz 3.1.0 - 3.2.1, driver version DSX.utils 5.0.3.166

See also the Driver and firmware versions for X.mio2

Configuration History for X.mio

The following are the required drivers for the Matrox X.mio board:

• Viz 3.6.0, driver version DSX.utils 9.2.2.2343

• Viz 3.5.3, driver version DSX.utils 7.5.2.1448

• Viz 3.5.0 - 3.5.2, driver version DSX.utils 7.5.2.447 (SP2)

• Viz 3.3.x, driver version DSX.utils 7.5.2.443

• Viz 3.2.2, driver version DSX.utils 5.0.3.171