Manualshelf

User guide

ManualsBrandsDVS ManualsComputer equipmentAtomix LT
261262263264265266267268269270
Viz Engine Administrator’s Guide
Page 270 Copyright © 2014 Vizrt
• x2 or x4 HD/SD SDI In
• x4 HD/SD SDI Out
• x1 Analogue Ref In
Video connectors for X.mio2
The front panel of the X.mio2/2 Plus breakout box provides the user with 8 or 10
standard BNC connectors.
• x2 or x4 HD/SD SDI In
• x4 HD/SD SDI Out
• x1 Analogue Ref In
• x1 Analogue Ref Loop
IMPORTANT! When using the Ref. In connector on the Matrox X.mio2 board for
synchronization, the Ref. Out Loop connector must be terminated with a 75 Ohm
resistor unless it is being used to loop an incoming GenLock signal.
Video connectors for X.mio
The front panel of the X.mio breakout box provides the user with 8 standard BNC
connectors.
• x2 HD/SD SDI In
• x4 HD/SD SDI Out
• x1 Analogue Ref In
• x1 Analogue Ref Loop
IMPORTANT! When using the Ref. In connector on the Matrox X.mio board for
synchronization, the Ref. Out Loop connector must be terminated with a 75 Ohm
resistor unless it is being used to loop an incoming GenLock signal.
Audio connectors for X.mio2 and 2 Plus