User guide

Viz Engine Administrator’s Guide

15 Matrox DSX LE Series

Viz Engine supports the Matrox DSX LE series, version 2 and 3. For more information

see the following sections:

• Cables and Connectors

• Drivers and Firmware

15.1 Cables and Connectors

The connectors for DSX.LE3 are:

• PCIe board compliant to PCIe 2.0 in x8 or x16 slot

• x4 SDI video outputs in SD and HD

• x16 Embedded Audio I/O Channels per SDI Stream

The board comes with an additional card and break-out cables for AES audio. Fill and

key signals and reference signals ( GenLock ) have their own BNC connectors. The

board should be installed in the same slot as the X.mio2/2 Plus board, and use the

same driver versions as Matrox X.mio2/2 Plus.

The connectors for DSX.LE2/CG are:

• PCIe board compliant to PCIe 2.0 in x8 or x16 slot

• x2 SDI video outputs in SD and HD

• x16 Embedded Audio I/O Channels per SDI Stream

This section contains information on the following topics:

• Breakout Cables and Connectors

• Video Cable Assignment

• Audio Cable Assignment