User guide

Viz Engine Administrator’s Guide

No. Item Explanation

1 SDI Out B BNC connector for an output of digital video signals (serial

digital interface, port B); usually used for an output of the

second video channel in single-link (YUV) or dual-link modes (3-

Gbit/s SDI); can also be used for the first video channel for the

second dual-link stream of YUVA or RGB[A]

2 SDI Out A BNC connector for an output of digital video signals (serial

digital interface, port A); usually used for an output of the first

video channel in single-link (YUV) or dual-link modes (either 3-

Gbit/s SDI or first dual-link stream of YUVA or RGB[A])

3 SDI In B BNC connector for an input of digital video signals (serial digital

interface, port B); usually used for an input of the second video

channel in single-link (YUV) or dual-link modes (3-Gbit/s SDI);

can also be used for the first video channel for the second dual-

link stream of YUVA or RGB[A]

4 SDI In A BNC connector for an input of digital video signals (serial digital

interface, port A); usually used for an input of the first video

channel in single-link (YUV) or dual-link modes (either 3-Gbit/s

SDI or first dual-link stream of YUVA or RGB[A])

5 Ref In BNC connector for the reference input

6 Fail Safe 0 See Fail Safe 1

7 AUDIO 1-8/LTC Flat cable connector for analog audio, the digital audio channels

1 to 8 and LTC

8 AUDIO 9-16 Flat cable connector for the digital audio channels 9 to 16

9 RS-422 A/B Flat cable connector for an in- and output of RS-422 signals

(main remote ports)

10 Fail Safe 1 For a bypass of the SDI input signals to the SDI outputs in case

of power loss connect to either this connector or Fail Safe 0 a

rechargeable battery (accu, see section “Technical Data” on

page A-1)

11 Breaking line The printed circuit board provides at its bottom an extension

void of any electrical parts; it may serve to stabilize the

installation of the board in a computer system; when not needed

or interfering, you can carefully break it off the circuit board at

the breaking line