User guide

Viz Engine Administrator’s Guide

Item Description

channel in single-link (YUV) or dual-link modes (either 3-Gbit/s SDI or

first dual-link stream of YUVA or RGB[A])

SDI Out B BNC connector for an output of digital video signals (serial digital

interface, port B); usually used for an output of the second video

channel n single-link (YUV) or dual-link modes (3-Gbit/s SDI); can also

be used for the first video channel for the second dual-link stream of

YUVA or RGB[A]

Audio and RS-422 panel

The board has the breakout cable, a RS-422 panel and cable. On the RS-422 panel

there are two connectors:

Item Description

Digital Audio (AES/EBU): DB-25 connector (female) for audio and LTC in- and

output; provides either four stereo channels digital audio

(channels 1 to 8) or three channels audio plus LTC. It can

also be used to provide the digital audio channels 9 to 16.

Remote In/Out: DB-9 connector (female), serial RS-422 interface for

master or slave control.

The breakout cable has 4 XLR male and 4 XLR female connectors to interface directly

with audio devices. The RS-422 panel’s cable is mounted on the back of the RS-422

panel’s board and connected to the Atomix HDMI board.

13.1.2 Supported Codecs

Currently, the DVS Atomix HDMI implementation only supports the Microsoft

DirectShow Filtergraph framework to render video clips. This enables play, for

example, of MPEG files or streams from a server.

For more information on how to use video clips in Viz Artist, see the Viz Artist User

Guide and, in particular, the SoftClip and MoViz plugins.