User guide

Viz Engine Administrator’s Guide
Page 156 Copyright © 2014 Vizrt
2. Select the Video Output section
3. When using an NVIDIA SDI output option and synchronize on blackburst, use the
following v-phase settings:
PAL: 606
NTSC: 509
720p50: 743
720p60: not supported
720p60M: 736
1080i50: 1113
1080i60M: 1113
4. When synchronizing with SDI, leave the v-phase to 0
To Configure Mosaic
1. Right-click the desktop and select the NVIDIA Control Panel.
2. Click Set up Mosaic.
3. Tick the Enable Mosaic box.
4. Tick all required displays.
5. Set the Refresh rate.
6. Set the Resolution (per display).
7. Click Apply.
8. Open Viz Config.
9. Click on User Interface.
10. Set Screen Layout Mode to Mosaic Horizontal or Mosaic Vertical.
11.4 Driver Recommendations
This section lists all the current NVIDIA Graphic boards and their recommended drivers.
For non current NVIDIA boards see NVIDIA Legacy Cards.
When the latest Viz Artist version is to be installed on a workstation or laptop, Vizrt
recommended to use NVIDIA driver version 340.84 (check the list in this section for
specific requirements).
For NVIDIA SDI extension boards used in an SDI workflow, firmware version 3.09 is
required.
This section contains information on the following topics: