User guide

Viz Engine Administrator’s Guide

3. In Global Settings select the Global presets option Base profile.

4. Set the following parameters:

• Ambient Occlusion: Off

• Anisotropic filtering: Application controlled

• Antialiasing-Gamma correction: Off

• Antialiasing-FXAA: Off

• Antialiasing-Mode: Override any application settings

• Antialiasing-Setting: 4x (4xMS)

• Antialiasing-Transparency: Off

• Power management mode: Prefer maximum performance

• Vertical Sync: Off (see Vertical Sync (below))

5. In the Global presets drop down box select Workstation App - Dynamic

Streaming.

6. Click on Apply.

Vertical Sync

Notes for Vertical Sync:

• Use the 3D application setting: Use for Viz installations (running in Standard PC

(VGA) mode) and for Video Wall setups where video is in use.

• Off: Used for Viz installations where video is in use (unless used for video walls).

• Unified Back Buffer: Must be disabled (Off) in any case. Note that this depends on

the driver version used. Most recent drivers from NVIDIA already have this setting

disabled.

• For Quadro FX 4500 SDI, and FX 5500 SDI boards the parameter use_old_nvsdk

may need to be set to 1 in the Viz configuration file, if stability issues encounter, on

unsupported systems.

To Configure the V-phase Settings when Synchronizing the Card

1. Start Viz Config, or open the configuration from Viz Artist (Config button in the

upper right corner)