User guide

Viz Engine Administrator’s Guide

• Channel 2 signals are available on Matrox OutB (fill) and Out D (key).

Note: Viz Trio Box CG requires Viz Trio 2.9 or later and Media Sequencer 1.19 or

later. Viz Trio Box CG is a single channel setup where you have a program channel

on the client machine in addition to your regular local Viz Engine preview.

See Also

• Viz Command Line Options

• HP Z800 Installations

• Viz Artist manual on Stereo Settings and Stereoscopy best practices

• Viz Trio manual on setup of the output channels using two graphics cards

11.3 Driver Configuration

This section contains information on the following procedures:

• To Configure NVIDIA Driver Settings

• To Configure the V-phase Settings when Synchronizing the Card

• To Configure Mosaic

To Configure NVIDIA Driver Settings

1. Right-click the desktop and select the NVIDIA Control Panel.

2. Click Manage 3D settings.