User guide

Viz Engine Administrator’s Guide
Page 124 Copyright © 2014 Vizrt
VIZChannelTrack2 = 0
VIZChannelTrack3 = 1
VIZChannelTrack4 = 4
VIZChannelTrack5 = 5
VIZChannelTrack6 = 6
VIZChannelTrack7 = 7
VIZChannelTrack8 = 0
VIZChannelTrack9 = 0
VIZChannelTrack10 = 0
VIZChannelTrack11 = 0
VIZChannelTrack12 = 0
VIZChannelTrack13 = 0
VIZChannelTrack14 = 0
VIZChannelTrack15 = 0
See also the configuration file’s SECTION AUDIO_CONFIG.
7.4 Channel Setup and Clip Channel Routing
Channel setups are configured using the Audio Settings section in Viz Config. To get a
correct mixing of clip channels to Viz Engine’s internal channels it is important to set
the audio channels in a correct way.
The Audio Settings section can for example be used To add new audio channels and
To add multi-language audio channels . The latter allows the same scene with the
same audio clips to for example output English, German, French and background
music on three different machines. It is also possible to create 3D and other channel
configurations for as many environments as needed. Stereo is configured by default.
From Viz Artist a scene designer is able To add multiple audio channel configurations
, To test audio channel setup, and switch between the different local setups matching
for example one or several remote Viz Engine audio setups. Configurations can also be
tested separately or all together.
This section also contains information on the following procedures:
• To test audio channel setup
To test audio channel setup
Test Clip, Audio Plug-in
1. Start Viz Artist
2. Create a new scene
3. Add a group container to the scene tree
4. Add the Audio Plug-in to the group container