User guide

Viz Engine Administrator’s Guide
Copyright © 2014 Vizrt Page 121
DirectShow provides a set of default filters that install automatically with Microsof
Windows® . These filters support many data formats while providing a high degree of
hardware independence.
All the filters supported by the DirectShow Software Development Kit (SDK) are listed
on the Microsoft Developer Network (MSDN) website. If a filter appears in GraphEdit but
is not documented by the MSDN online reference, it means the filter has either been
installed by a third party or is used internally by some other Microsoft technology. Such
filters are not supported by the DirectShow SDK.
7.1.7 DirectSound Input
Microsoft DirectSound provides a system to capture sounds from input devices and play
sounds through various playback devices using advanced 3-dimensional positioning
effects, and filters for echo, distortion, reverberation, and other effects.
A DirectSound compatible card is an alternative for designers that use laptops with no
video card installed, or if analog audio is needed.
Viz supports DirectSound compatible cards that support DirectX version 8 or later.
Note: Matrox and Targa are only able to output digital audio.
Emergency Alert System
The analog audio input through the DirectSound device is also, for broadcasters in the
United States of America, reserved for the Emergency Alert System ( EAS ).
If the EAS is activated all audio will be muted and the source from the first analog audio
card installed in the system will be played through the Matrox or Targa board.
7.1.8 DirectSound Audio Card
Viz Engine 3 is able to use any DirectSound capable audio card installed in the system.
If a Matrox or Targa board is installed on the system, Viz Engine synchronizes the audio
output of the DirectSound cards to the video sync signal coming in to the video card.
See Also
Device Recognition and Selection
7.2 Device Recognition and Selection
The Viz Engine 3 audio system is able to use any installed DirectSound capable audio
device. On every device up to 16 channels can be used.
During the startup process Viz Engine tests all available audio cards installed on the
system. It is currently only possible To manually activate an audio device by configuring