Installation manual

Appendices Nucoda and Phoenix 2014 Install Manual

Appendices

SMPTE / CGR Scaling

Using SMPTE video bars (64-940 or 0-100%), we will consider the SDI signal as it

passes through the system when using the two modes Linear (SMPTE) and Linear

(CGR).

Input Scope

SMPTE video bars 0-100%

Data 64-940

note

These examples will use YC

4:2:2 SDI signals.

Linear (CGR) mode does not scale RGB 4:4:4 signals unless you set the

general.prefs option :

scale444 true

IM-2014_1-1.0 Page 71