Installation manual

Red Rocket Install Nucoda and Phoenix 2014 Install Manual
Installation
alert!
When working inside your computer workstation with the Red Rocket card, ensure
you read and follow the safety instructions detailed in the Red Rocket Installation
Guide.
note
Always read the application Release Notes before installation.
If you are requested to update the Red Rocket driver and firmware and the hardware
is already installed, you should uninstall the driver before doing the update i.e.
My Computer / Manage / Device Manager - open Sound, video and game controllers,
right-click Red Rocket and select Uninstall :
Once the uninstall is complete, reboot. Then update driver and firmware as
described below.
1. Install Red Rocket card :
a. Shutdown your workstation, unplug power and open case
b. Install the Red Rocket card in a spare x16 PCI-Express slot
[page 67 below]
c. Close case and return cabling and power.
d. Start workstation.
2. Install Windows driver :
a. Windows will notice new hardware and open the Found New Hardware
wizard
b. Select : Install from a list or specific location
c. Navigate to the folder containing the Windows driver files and proceed to
install.
Continue through any Windows warning dialog window.
3. Reboot workstation
IM-2014_1-1.0 Page 66