Installation manual

THX Cinespace Nucoda and Phoenix 2014 Install Manual
Enabling Cinespace
To enable THX cineSpace for a project output format, select the THX CineFilmMaster
CMS mode on the project screen :
Figure 32 : Select THX CineFilmMaster CMS mode
You can then use the ..Select custom CMS dialog to choose your monitor and target
profiles and configure Cinespace.
Burnt in CMS
You can burn a selected CMS profile into an output format by enabling the Apply CMS
button :
Figure 33 : Enabling a burnt in CMS using Apply CMS
note
You can only burn-in a CMS to a secondary output format.
View CMS
Use the selected CMS profile as a viewing LUT only by enabling the View CMS button
inside the project.
IM-2014_1-1.0 Page 63