Installation manual

Shuttle Pro Nucoda and Phoenix 2014 Install Manual
Shuttle Pro
If you have a Contour ShuttlePRO, we supply a preference file you can use.
Configuration
Each Digital Vision application has a specific ShuttlePRO preference defined for use
with the application. To use the right preference, follow these steps :
· Right-click on the ShuttlePRO 2 icon in your system tray and select Open
Control Panel
· In the Control Panel, click on the Options button
· Then Import Settings.
· Browse to (depending on product) :
C:\Nucoda\ShuttlePRO or
C:\Phoenix\ShuttlePro
· Select the relevant Digital Vision application preference file and Open.
· Press Apply on the Control Panel
The ShuttlePRO should now work with the Digital Vision application.
note
The key mapping on the ShuttlePRO device for the Digital Vision application can be
modified. See the ShuttlePRO manual for help with this.
IM-2014_1-1.0 Page 57