Installation manual

DVS Centaurus II Video Nucoda and Phoenix 2014 Install Manual
DVS SDI Stereo
The Digital Vision 2014 release includes support for Stereo Mode monitoring using the
DVS video board.
note
You will need the Multidevice license option installed on your DVS video card. To find
installed options, use the dvsconf program (see page 53).
Enabling this mode will output video tracks 1 and 2 to the two stereo channels via SDI A
and B. Both SDI channels with be in 4:2:2 mode.
Stereo Outputs
Video Track SDI Output Channel
1 A Left
2 B Right
Enabling Stereo Mode
There are two configuration options for stereo mode :
Project Global Level
This is a tickbox on the main project screen :
Device Level
The device level setting enables stereo output for the DVS Centaurus II video card.
These settings are inside the IOCard section of the main preference file
general.prefs :
Name Description Default
dualDVSOutput
Enable or disable stereo output through
SDI A and B channels.
false
reverseStereoOutput
Switch the left/right stereo channel
between SDI A and B.
false
IM-2014_1-1.0 Page 55