Installation manual

NVIDIA Graphics Nucoda and Phoenix 2014 Install Manual
Figure 23 : Orientation for setting
Top Left.
Figure 24 : Orientation for setting Centre.
NVIDIA DVI Stereo
The Digital Vision 2014 release includes support for Stereo Mode monitoring using the
NVIDIA DVI output.
This stereo mode treats the left and right stereo channel as a separate field which is
interlaced to a frame for display through DVI.
note
This stereo mode requires monitor support (e.g. Zalman ZM-M220W).
Enabling Stereo Mode
There are two configuration options for stereo mode. One option sets enables stereo
globally and one sets which device we use.
note
For Centaurus II SDI stereo, see page 55
Project Global Level
This turns stereo mode on for the project globally and is a tickbox on the main
project screen.
Figure 25 : Project level stereo mode enable button
IM-2014_1-1.0 Page 50