Installation manual

NVIDIA Graphics Nucoda and Phoenix 2014 Install Manual
Application Configuration
Start the Digital Vision 2014.1 application and on the main screen, select the
Preferences/Monitoring tab :
Figure 21 : Monitoring preferences
Then enable the Dual Display tick box :
This ensures the application is aware of both display screens and orientates itself.
note
Note that many of the Monitoring/Video IO settings require an application restart. You
can configure more than one setting at a time by pressing Cancel when prompted to
restart and proceeding to the next configuration option. Restart once all done.
alert!
Do not enable the NVIDIA SDI direct output.
We can orientate the display the application expects on each of the two outputs i.e.
which display for GUI and which for Monitor :
Figure 22 : Dual Display DVI order and Monitor Anchor
Monitor Anchor
If our displayed image size is different to the resolution of our monitor (e.g.
displaying PAL frames on an HD resolution display), then Monitor Anchor defines
how our image is re-positioned and placed inside this display.
note
This is mainly used when the second monitor resolution is different from the
primary (GUI) display resolution.
We re-position and re-fit the image using the panel buttons fit and 1:1 (keyboard
short cut keys f and g respectively).
Set the Monitor Anchor dependent on how the second display is positioned in
respect to the first on the desktop Display Properties window :
IM-2014_1-1.0 Page 49