Installation manual

Licensing Nucoda and Phoenix 2014 Install Manual
See page 27 for locating your system MAC address.
7. The LAN MAC used must be on an active network interface. It must not be
disabled.
8. Make sure that the license string in the license.flic file is on one line only Do
not split license strings over more than one line.
9. Make sure that the version of software you are running matches the version in the
license (second field e.g. 2014.1)
10. Make sure you are running the correct application as per the license file.
11. The license is read from top to bottom. Make sure new and current licenses are
first in the file.
12. The date in the license string is the date the license was created. This is followed
by a duration number (in days). Make sure that the DATE and DURATION is
within the active license period.
13. Some virtualisation products (e.g VMWare) interfere with the network devices we
try and attach to. If you have such software installed, try disabling or uninstalling it.
IM-2014_1-1.0 Page 29