Installation manual

Control Panels Nucoda and Phoenix 2014 Install Manual
● Edit the DV_VALHALL_PANEL environment variable via My Computer /
Properties / Advanced tab
● Modify the IP address for the host LAN port connected to the Valhall.
alert!
The panel mouse driver uses the Windows Registry to determine the panel IP
address. If you change the panel IP address from the default, you need to modify the
registry. See the section Valhall Mouse Driver below.
Valhall Mouse Driver
The Image Panel includes a trackball and buttons. This works as a mouse with the
Digital Vision Mouse Driver installed. The driver is installed automatically if you select to
install the Valhall Panel when installing the main software application.
note
The mouse driver is installed as a Windows service and can be managed in the
normal way via Control Panel / Administrative Tools / Services. The service is called
DvMouseDriver.
When running, an icon will be present in your Windows system tray :
Figure 13 : Valhall connected (top) and disconnected (bottom) system tray icons
Valhall Panel IP Change
If you change the Valhall panel IP address (see page 24), you will need to modify the
Windows Registry to ensure the panel mouse continues working :
● Start / Run : regedit
● Navigate to :
HKEY_LOCAL_MACHINE /
Software / Digital Vision / Valhall / RTC
● Right-click in the right-hand pane and select New / String Value :
IM-2014_1-1.0 Page 25