Installation manual

Software Installation Nucoda and Phoenix 2014 Install Manual
Software Installation
To start the installation, double click an installer program :
install_nucoda-2014.1.nnn.exe
install_phoenix-2014.1.nnn.exe
note
We will use the Nucoda platform as our referenced application throughout this guide.
Installation and setup for the Phoenix platform is equivalent unless stated otherwise.
In most cases, simply replace the name Nucoda with the name Phoenix.
Install Process
Complete each step, pressing the Next button to continue.
Figure 1 : Installer starts
Figure 2 : Choose product
You can only choose to install a single product at a time.
note
The available options depend on the selected product e.g. the Valhall panel install
option will not be available for the Nucoda Compose product. See the Install Options
section on page 12.
Figure 3 : Choose options Figure 4 : Review choices
IM-2014_1-1.0 Page 10