Installation guide

1-2
Atomix HDMI Installation Guide
– 4 × SDI output
– Watchdog to switch SDI input to output in the breakout box in
case of failure
– 4 × RS-422
– AES/EBU audio
– LTC input and output
– No additional slot space required with Atomix HDMI
1.1 Overview
This guide informs you about the installation of Atomix HDMI as well
as all connection possibilities. Furthermore, it provides information
about the setting of license keys, the upgrade of the firmware, the test-
ing of the installation, and of maintenance work that you may perform
on your own.
In detail the chapters contain the following information:
Chapter 1 Begins with a short introduction to Atomix
HDMI, followed by a note regarding the audi-
ence this manual is written for and an explana-
tion of the conventions used in this manual.
Beside the system requirements necessary to
run Atomix HDMI, it provides safety instruc-
tions that you must adhere to and some impor-
tant notes that you should read.
Chapter 2 Gives an overview of Atomix HDMI as a video
board product and describes shortly its individ-
ual components. Furthermore, the items,
switches and connectors of the Atomix HDMI
board and its additional panels are detailed in
this chapter.
Chapter 3 Describes the installation of Atomix HDMI.
First the hardware installation is explained, fol-
lowed by some hardware related settings and
upgrades to be effected with the software.
Chapter 4 Details service and maintenance work in case
of a firmware upgrade failure.
Appendix Provides technical details and general informa-
tion about Atomix HDMI. This chapter also
contains a short reference to the items available
on the Atomix HDMI board.
Index This chapter facilitates the search for specific
terms.