Specifications

© Digital View Ltd 2010 www.digitalview.com Page 9 of 34
Exit
Exit the OSD menu and save the settings
Position#
Autosetup
Auto adjust the positions, phase, frequency
Yes No
Frequency
Adjust the image horizontal size
Phase
Fine tune the data sampling position (adjust image quality)
Image Horizontal
Position
Use +/- to move the image horizontally
Press – or + (- + )
Image Vertical
Position
Use +/- to move the image vertically
Press – or + (- + )
Exit
Exit the OSD menu
Utilities
OSD setting 4
OSD Timeout : 0 / 10 / 20 / 30 / 40 / 50 / 60 seconds (Always on when set to 0)
Press – or + (- + )
OSD menu horizontal position
Press – or + (- + )
OSD menu vertical position
Press – or + (- + )
Load Factory Default
Initialize the setting stored in non-volatile memory
Sharpness
Adjust sharpness level
Press – or + (- + ) Total : 49 steps
Exit
Exit the OSD menu
Exit the OSD menu
[Firmware version : V1.10.00 or up]
* - Function in Video mode only
# - Function in ARGB mode only
Items marked 4 have sub menus.
Exit the OSD menu to save the setting chosen