Specifications

© Digital View Ltd 2010 www.digitalview.com Page 8 of 34
Select Auto video system detection
Select PAL video system
Select PAL M video system
Select NTSC video system
Select NTSC 4.43 video system
Select SECAM video system
Wide screen mode
information
display#
Select the input mode (1280 / 1360 / 1366 / 1368) to recognize and display the correct
input signal information display on the OSD menu.
1280 : 1280x768
1360 : 1360x768
1366 :1366x768
1368 : 1368x768
Exit
Exit the OSD menu and save the settings
Brightness and Contrast
Brightness
Increase/decrease brightness level.
Press – or + (- + ) Total : 256 steps
Contrast
Increase/decrease panel contrast level.
Press – or + (- + ) Total : 192 steps
Saturation*
Increase/decrease hue level.
Press – or + (- + ) Total : 256 steps
Hue*
Increase/decrease saturation level
Press – or + (- + ) Total : 128 steps
Exit
Exit the OSD menu and save the settings
Color
Auto RGB Calibration#
Yes No (See appendix IV)
Color Temperature 4 (Adjust the warmness of the image displayed. The higher temperature the
coolest image looks like. The lower temperature the warmest image looks like.)
Adjust red color level
Press – or + (- +) Total :128 steps
Adjust green color level
Press – or + (- +) Total : 128 steps
Adjust blue color level
Press – or + (- +) Total : 128 steps
Press SEL UP/DN button to select item
Set the color temperature to 4200K
Set the color temperature to 5000K
Set the color temperature to 6500K
Set the color temperature to 7500K
Set the color temperature to 9300K
Gamma adjustment4
Adjust Gamma settings (0.4 / 0.6 / 1.0 / 1.6 / 2.2)
Select Gamma to 0.4
Select Gamma to 0.6
Select Gamma to 1.0
Select Gamma to 1.6
Select Gamma to 2.2