Specifications

Introduction

Designed for LCD monitor and other flat panel display applications, the DVS-1600 controller provides easy to use

interface controller for:

¾ TFT (active matrix) LCDs with LVDS / TTL single pixel interface of 1680x1050, 1600x1200, 1400x1050, 1440x900,

1366x768, 1280x1024, 1280x800, 1280x768, 1024x768, 1024x600, 800x600, 800x480, 640x480, 480x640 resolution

¾ Computer video signals of UXGA, SXGA, XGA, SVGA, VGA standard

HOW TO PROCEED

¾ Ensure you have all parts & that they are correct, refer to:

• Connection diagram (separate document for each panel)

• Connector reference (in following section)

• Assembly notes

¾ Check controller switch & jumper settings (errors may damage the panel)

¾ Prepare the PC

¾ Connect the parts

¾ Understand the operation and functions (in following section)

IMPORTANT USAGE NOTE

This product is for use by system developers and integrators, the manufacturer accepts no liability for damage or

injury caused by the use of this product. It is the responsibility of the developer, integrators or other user of this

product to:

¾ Ensure that all necessary and appropriate safety measures are taken.

¾ Obtain suitable regulatory approvals as may be required.

¾ Check power settings to all component parts before connection.

¾ Understand the operation and connectivity requirements of this controller.

DISCLAIMER

There is no implied or expressed warranty regarding this material.

SYSTEM DESIGN

A typical LCD based display system utilising this controller is likely to comprise the following:

Summary:

1. LCD panel

2. LCD controller card, DVS-1600

3. LVDS cable (for connection with LVDS panel)

4. TTL cable (for connection with TTL panel)

5. Inverter for CCFT backlight (if not built into LCD)

6. Inverter cable

7. Function controls