Specifications

CONTROLLER DIMENSIONS

The maximum thickness of the controller is 21.6mm (measured from bottom of PCB to top of components, including

any underside components & leads). We recommend clearances of:

• 5mm from bottom of PCB - if mounting on a metal plate we also recommend a layer of suitable insulation

material is added to the mounting plate surface.

• 10mm above the components

• 3~5mm around the edges

Any of the holes shown above can be used for mounting the PCB, they are 3.2mm in diameter.

CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high

voltage parts such as the inverter.