User's Manual
3) Connect the power cable to DC 12V terminal located at the left side of the product
and car cigar jack.
4) Remove the test jack from the Safety terminal and then, connect the cable to the hand brake.
5) Press the power switch ON that is located at the left side of the product.
10
About VXA-3000
Caution
Use the car cigar jack that is included in the product package. If you use other cigar
jack, the product may not work properly.
Caution
Make sure connect the cable to the car hand
brake to prevent operation while in motion. If the hand brake
connection cable is not connected, only Ŕaudioŕexternal input will
be supported.
VXA-3000
Red : +
: Blue
-