User's Manual

13-8. Touch Calibration
Selecting this menu to increase accuracy of the touch screen.
For touch screen setting, press and briefly hold the center of the cross symbol. Then, the cross symbol
will appear at the left upper side, left bottom side, right bottom side, and right upper side one by
one. To complete touchscreen setting, press the center of the cross symbol for 5 times in total.
13-9. OK
You can save all settings by pressing this button
13-10. Cancel
You can cancel all settings you made by pressing this button.
13-11. INIT
The factory default setting will be stored, if you press this button.
53
Using Navigation System
Navigation System
Basic Operation
Caution
If you press the point that is far away from the cross symbol during touchscreen setting,
the cross symbol will appear indefinitely. Therefore, always stop the car before setting up the
touchscreen setting. Do not use a tool with too sharp tip, since it can damage the touch panel.
Instead, use a round edge object like the test jack for setting.