User manual

ManualsBrandsDVR ManualsComputer equipment8-CH

4 / 8-channel H.264 DVR User Manual

in the harddisk state, when you can click “ HDD Format ” to format the harddisk. If the

system detects any available harddisk, the harddisk state will be “ ONLINE ” ;

ALL/FREE

ALL/FREE :

: referring to the total storage capacity and current remaining storage

capacity of the harddisk;

TIME

TIME LEFT

LEFT

LEFT : referring to the time remaining for recording based on the currently set

picture “ resolution ” and “ quality ” ;

FORMART:

FORMART: Click the check box, a “√” will appear in this box, indicating that this HDD

has been selected.

OVERWRITE

OVERWRITE :

: ENABLE :The harddisk will overwrite the earliest record when its memory

is full; DISABLE : Recording will stop when the memory of the harddisk is full;

HDD

HDD FORMART

FORMART

FORMART : If the harddisk is used for the first time, it is often necessary to format

the harddisk. Click the “ Format HDD ” button, and then click “ Enter ” for formatting in the

pop-up prompt message dialog box, otherwise click “ Cancel ” . After clicking “ Format

HDD ” , the system will prompt “ You will lose all data by formatting the harddisk. Will you

continue? ” Then press “ Enter ” , and the system will prompt “ Formatting …” and then

“ Formatting Successful

” . The system will restart automatically;

USB

USB FORMART

FORMART

FORMART :

: formatting the data in the U-disk.

The “ Default ” button is used to restore the factory default values.

Note: In order to connect the harddisk data on the DVR securely, we recommend that

the harddisk must be formatted before the first time of recording.

3.6

3.6 Basic

Basic

Basic setup

setup

Enter the Basic Setup screen from “ Main Menu ” →“ Basic ” , as shown below:

The Basic Setup screen includes the 6 options of System Language, Time Setup, User

Password, Display Setup, Video/Audio Setup and Exit.

3.6.1

3.6.1 System

System

System language

language

Move the cursor to the “ L ANGUAGE ” option (the icon is enlarged and highlighted to

indicate selection), and press “ Enter ” to enter the setup screen of this option, as shown

below: