4 / 8-channel Embedded Digital Video Recorder 1
4/8-channel H.264 DVR User Manual Notes..................................................................................................................................................3 Chapter 1 Overview Overview......................................................................................................................3 1.1 Introduction...................................................................................................................... 3 1.2 Packaging and accessories............
4/8-channel H.264 DVR User Manual 3.6.5 VIDEO/AUDIO................................................................................................. 18 3.7 Advanced....................................................................................................................... 18 3.7.1 Alarm..................................................................................................................18 3.7.2 System info................................................................................
/8-channel H.
4/8-channel H.264 DVR User Manual ◎ ◎ One piece of HDD power cable (already installed in the host) One piece of CD. 1.3 Main features ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ Standard H.264 video compression format 16-bit true-color semi-transparent graphical menu interface, menu options tip A variety of recording modes: manual, timing, movement and alarm recording Optimized four-channel simultaneous playback (single playback for eight-channel ones) A variety of backup (U disk, mobile harddisk, network) One USB2.
4/8-channel H.
4/8-channel H.264 DVR User Manual Front panel 2 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ 11 No. Definition No. Definition No.
4/8-channel H.264 DVR User Manual 1.6 Remote controller For reference only, the real product shall prevail. Key Functional definition Spare keys Spare keys 0~9 Channel selection; number keys PTZ PTZ Control Single and multi-split screen Quit shortcut menu Shortcut menu Direction buttons: Next, on the left and right OK ESC Exit / Return MENU Enter the main menu STARTRE Start recording (please refer to 2.4.6 C for the method) STOPREC Stop recording (please refer to 2.4.
4/8-channel H.264 DVR User Manual 1.7 Mouse This equipment supports USB1.1 mouse, so the user can operate with mouse (mouse operation is as same as WINDOWS operating setting) to realize menu functions. It is just ok to insert the mouse with USB interface to the mouse interface in this equipment.
4/8-channel H.264 DVR User Manual Chapter 2 Quick installation 2.1 HDD Installation Harddisk installation must be carried out by technicians to avoid damage to the equipment and harddisk. The DVR mainframe must be powered off before operation. This equipment supports harddisk with SATA harddisk interface.Installation procedures are as follows: A. Open the equipment and a harddisk support can be seen. B. Connect the harddisk data and power cable well C.
4/8-channel H.264 DVR User Manual Equipment code: it is just ok to enter equipment code “000000” displayed on right side in corresponding input box. The defaulted code will be guided to the number box when mouse operation; we recommend to set mainframe password when remote controller is operating many equipments, to divide through targeted equipment code input, or the remote controller will disturb the adjacent mainframe. 2.
4/8-channel H.264 DVR User Manual also controllable. 2.4.6 MUTE 7 Manual recording/stop recording 2.4. 2.4.7 If “timing record” is on (please see Chapter 3), and recording is not set in this period, "manual recording" and "timing record" is effective. When boot-record mode is on, this function is not available. Chapter 3 Advanced settings 3.
4/8-channel H.264 DVR User Manual REC.MODE REC.MODE:: available in the two modes of startup recording and timing recording. When powered up up:: starting recording when this unit is energized (It works only if the corresponding channel is enabled in the “Channel” option.) BY TIME TIME:: performing recording as scheduled. When “timing recording” is selected, the “Record Time Configuration” button will appear on the right.
4/8-channel H.264 DVR User Manual Month: displaying the record information of every day in the current month. A green block indicates normal recording, a red block indicates alarm recording, and the background color indicates no recording. Click a date on this bar to search the record information of every hour of that day. The search results will be visualized in the “Day” bar below. Date: displaying the recording hours of the current day. Each lattice represents 1hr, and one recording segment is 0.5hr.
4/8-channel H.264 DVR User Manual the menu of the previous level; 5 When the selected record file has been played out, any consecutive record file will be played automatically; if there is no consecutive record file, this unit will return to the detailed file list automatically. 3.4 Backup Enter the “File List” (see 3.3 Video Search) screen for the backup operation. The record file may be backed up by a USB storage device.
4/8-channel H.264 DVR User Manual in the harddisk state, when you can click “HDD Format ” to format the harddisk.
4/8-channel H.264 DVR User Manual The system has optional multiplex languages ,after choosing the language,click "Apply" button to save, and it will go into effect after system restart. 3.6.2 Time setup Move the cursor to the “DATE/TIME” option (the icon is surrounded by a yellow frame to indicate selection), and press “Enter” to enter the setup screen of this option, as shown below: The system time, date format, time format, time zone and summer time can be set up in this screen. 3.6.
4/8-channel H.264 DVR User Manual Admin password password: This option is operated with keys or the mouse. Enter digits directly to set the administrator password. Notes Notes: 1) This unit has no initial password. When you’re setting up passwords, it is recommended that the two passwords are set up together. If any set password is forgotten, please contact your dealer or the technical department of the manufacturer.
4/8-channel H.264 DVR User Manual Preview time time: On: The system date and time are displayed right above the Video Preview screen; Record Time : On: A clock can be displayed in the playback of the current record file. 3.6.
4/8-channel H.264 DVR User Manual I/O CHANNEL/ALARM CHANNEL/ALARM: Each channel corresponds to an I/O state alarm, when the alarm input of a channel is valid, the alarm record of the corresponding channel will be started. Normal On On: The external alarm circuit is open at ordinary times, and closed when there is an alarm. Normal Off Off: The external alarm circuit is closed at ordinary times, and open when there is an alarm.
4/8-channel H.264 DVR User Manual SSL SSL: a secure link transmission protocol, whose “Off” or “On” state is determined by the mailbox server. “Off” is usually chosen. SMTP PORT PORT: the mailing port of the mailbox server, usually being 25, with the exception of a few mailboxes, such as the mailing port of the GMAIL server whose port number is 465. SMTP SMTP: the server address of the mailbox used, for example, the SMTP server of the Yahoo mailbox is smtp.mail.yahoo.com.
4/8-channel H.264 DVR User Manual MD Channel and STATUS STATUS: Each channel has a corresponding switch. Press “Enter” to select motion detection “On” or “Off”. SENSITIVITY SENSITIVITY: Each channel has a corresponding sensitivity setting, with the 4 levels of 1, 2, 3 and 4, in which 4 is the highest. Press “Enter” for changeover. MD AREA AREA:: Each channel has a corresponding motion detection area setting.
4/8-channel H.264 DVR User Manual 3.7.4 Mobile phone monitoring The mobile phone monitoring function of this series DVR is supported by mobile phones of the Windows Mobile and Symbian operating systems, such as Dopod P660, Nokia N78 and Nokia 95.
4/8-channel H.264 DVR User Manual The power system should not be interrupted during updating. DEFAULT SETTING SETTING:Restore the system parameters to the default settings. RESTART :Restart this unit. 3.7.
4/8-channel H.264 DVR User Manual successful, this unit will be allocated an IP address, which will be displayed on the screen. PPPOE PPPOE: broadband dial-up network access, as shown below: PPPOE user name and password password: Fill in the PPPOE user name and password provided by the Internet service provider. When one ADSL line is connected to one DVR only, you can select Internet connection in the PPPOE mode, when the ADSL modem will connect the DVR directly.
4/8-channel H.
4/8-channel H.264 DVR User Manual 2) Activate account Log in your mailbox and open the confirmation link sent from support@dyndns.com, as shown below: Click the link below and enter the website to activate the account. 3) Login After successful activation, open the home page http://www.dyndns.com/ to log in.
4/8-channel H.264 DVR User Manual Enter the “Dynamic DNS Free” screen, as shown below. Click “ ”. Enter the hostname, select the service type and then enter the dynamic IP address (usually being the dynamic IP address of the network of the DVR host) to be tied in the Add New Hostname screen, as shown below. Complete the application for the dynamic domain name as prompted.
4/8-channel H.
4/8-channel H.264 DVR User Manual 9 Port forwarding 3. 3.9 Port forwarding procedures: 1) Set the host IP address. See the relevant section. 2) Log in the router. If the IP address of the router is 192.168.1.1.
4/8-channel H.264 DVR User Manual Click “Applications& Gaming ”, as shown below: As shown above, fill in the IP and the port number in the corresponding files, and select “Both” in [Protocol]. The tick below [Enable] denotes “selected”. After setup, click “Save Setting” to save the settings.
4/8-channel H.264 DVR User Manual 80 stands for the WEB port, 9000 for the media port and 6000 for the mobile phone port. All these ports can be modified in the menu. Chapter 4 DVR network 4.1 Functional characteristics In network operations, software installation is realized by the IE browser of the operating system itself, which is simple and convenient. The DVR supports LAN and WAN access, as well as IP and domain name access. 4.
4/8-channel H.264 DVR User Manual 4.3 IE log-in Log in the system after the plug-in unit has been installed. For example, if the domain name of the DVR dvrtest05.eicp.net and its port is 80, enter the domain name in the IE address bar, as shown below, enter the user name and the password, select “LAN” or “INTERNET” depending on the network environment, and click “Login” to log in the client end or access the DVR end remotely.
4/8-channel H.264 DVR User Manual 4.5 Record playback Click "PLAYBACK"to enter the Record Playback screen, as shown below: First select the date of the record to be played and the channel and record types, and then click “Search”. The eligible record files will appear in the file list, with the bold numbers denoting dates with record data, as shown in the figure above. Select the file to be played back, and double-click this file or click “Playback” to play it.
4/8-channel H.264 DVR User Manual Chapter 3 for details. Note: “Detail” can be set in 4-channel DVRs only. 4.7 Alarm setup Click “Setup” →“Alarm ” to enter the Alarm Setup screen, as shown below: The setup method is the same as the mainframe menu. See “Alarm Setup” in Chapter 3 for details. 4.8 PTZ control Click “Setup” →“PTZ ” to enter the PTZ Control mode. See Figure 5-6: See Chapter 3 “Network Setup” in this manual for the setup method. 4.
4/8-channel H.264 DVR User Manual 4.10 System setup Click “Setup” →“Setting” to enter the Setting screen, as shown below: INTERNET INTERNET:: setting the code stream; the higher the code stream is, the clearer the remote image will be, but the network bandwidth must be high, otherwise the image may have a delay.
4/8-channel H.264 DVR User Manual Chapter 5 Client software & Player 5.1 Client software Open the Client software file " ,operate one of these two files and install it according to the remarks.Operate the program icon on the desktop after the installation.
4/8-channel H.264 DVR User Manual Click “File（F）” as shown in the following image,select 'open the local files（F）' When opening the root of the record file,please select the format as .
4/8-channel H.264 DVR User Manual There will be .264 files in the file list,select one of the files to be played.
4/8-channel H.264 DVR User Manual ① Function Definition Function Icon ① Icon Recording Schedule All video Play Forward, Play backword Increase video Pause, STOP << >> Definition ST Start Operation Backward /forward frame File Cut Slow/Normal/Fast File Deletion avi Next Hour AVI Format transmission Capture bitmap OSD Decrease video Volume Control Note: Note:1.Double click the image to enlarge the image 2.When converting the AVI format, you should click ST button.
4/8-channel H.264 DVR User Manual Select the channel audio to be played,then click 'OK', as shown in the following instructions: Appendix 1. Q&A 1. 2. 3. 4. How to recover password if forgotten? A: Please contact technicians from vender or manufacturer if you have forgotten the password. Please set a safe password easy to remember (don’t set simple password like 123456 if you need more safety).
4/8-channel H.264 DVR User Manual 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. How long can a 4-channel or 8-channel DVR record if 1000G harddisk is used? A: Please refer to Appendix 2 “harddisk space calculation”.
4/8-channel H.264 DVR User Manual 16. 17. 18. 19. when select “LAN” in “network environment” option in login interface; for 4-channel DVR, in addition to select “LAN” in “network environment” option in login interface, please select “ordinary” in “details” option under recording mode.
4/8-channel H.
