Specifications

WPS-100-DVR-8CH Installation and Users Manual

To navigate and operate this menu:

 •MODE

Press the Mode button on the front panel of the DVR or on the remote control to begin searching the

recorded video and audio based on the selected search Time, Camera, and Motion Area. Alternatively

use the mouse to set the parameters and begin the search. The search results will be displayed on the

right half of the dialog box.

Note: To prevent the Smart Search feature from overloading the system, a maximum of up to 500

matched les or 200 GB of hard drive storage for each record partition will be searched based on the

start time entered.

 •SEQ

Use the SEQ button on the front panel of the DVR or on the remote control to scroll the results Page Up.

Alternatively use the mouse to select the Page Up option.

 •CALL

Use the CALL button on the front panel of the DVR or on the remote control to scroll the results Page Down.

Alternatively use the mouse to select the Page Down option.

 •Numeric

Press the numeric buttons on the front panel of the DVR or on the remote control followed by the ENTER

button to select the display page of the results. Alternatively use the mouse to click the Page Number box.

•Copy( )

Select the COPY button from the front panel of the DVR or on the remote control to backup (copy)

the selected type of recorded video (beginning from the Search Time) to the connected backup device.

The Backup menu (described in the Archive portion of Section 8.6) will be displayed. Alternatively use the

mouse to select the COPY button.

Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:

 •CAMERAID

Press +/- buttons on the front panel of the DVR or on the remote control to change the camera ID to

  besearchedformatchingles.AltenativelyusethemousetoentertheCamera ID number.

 •START/ENDTIME

Press +/- buttons on the front panel of the DVR or on the remote control to modify the beginning and end

of the search time for the recorded video and audio. Enter the appropriate Year, Month, Date, Hour, and

Minute. Alternatively use the mouse to enter these parameters.

 •MATCHEDFILELIST

The results of the Smart Searchwillbedisplayedintherightsideofthedialogbox.Thelesareshown

from oldest to newest and a page number is shown on the lower-left corner of the dialog box.

The user may:

1. Press the ENTER button on the front panel of the DVR or on the remote control to select or deselect

      amatchingeventleintheresultslist.Multipleeventscanbeselectedinthismanner.Alternatively

use the mouse to select or deselect each event.