Specifications

49
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
“-“ (Default - No Guest Access Allowed
Administrator
-ProvidesfullaccesstotheDVRallowingforviewingofallcamerasandmodicationtoall
settings. Use this setting with caution.
Supervisor
- Provides access to view and control all cameras, Search, Archive and modify basic settings.
Operator - Provides access to view and control all cameras. No access to Search or settings is provided.
UserName
-ProvidescustomizedaccesstothefeaturesasdenedintheAdvancedSettingsforaparticular
user. See Adv: below for more information.
Note: If an RS-232 or IP control system is being used, the Default setting allows the system to control the DVR, but
prevents Guest access to DVR features. With this setting users would be required to enter a Login and Password
to view cameras, change settings, etc.
•Remote Guest Level
Allows or restricts access to the DVR by Guests accessing the DVR from the Internet Explorer plugin interface
without a dedicated Login. The option selected determines the level of access a Guest will have.
“-“ (Default) - No Guest Access Allowed (Does not prevent access by User with login credentials)
Administrator
-ProvidesfullaccesstotheDVRallowingforviewingofallcamerasandmodicationtoall
settings. Use this setting with caution.
Supervisor
-Providesaccesstoviewallcontrolallcameras,Search,andmodicationofbasicsettings.
Operator - Provides access to view all control all cameras, No access to Search or settings is provided.
UserName
-ProvidesaccesstothefeaturesdenedintheAdvancedSettingsforaparticularuser.SeeAdv:
below for more information.
•AutoLogout
If there is no user operation in the time selected from 1 minute to 24 hours, the user will automatically be logged
out. Select “-“ to disable this feature (default setting). Press +/- buttons on the front panel of the DVR or on the
remote control to change this setting. Alternatively use the mouse to set this value.
•LoginName
Enter a unique Name for each user. Follow the Text Input method described in Section 4.1 to enter this
information.
•Password
Enter a unique Password (numbers only) for each user. Follow the Text Input method described in Section 4.1 to
enter this information.
•Level
Select the appropriate access level (Administrator, Supervisor, Operator, or Customized) for each user. Press +/-
buttons on the front panel of the DVR or on the remote control to change this level. Alternatively use the mouse
to set the level.
“-“ (Default) - No Guest Access Allowed
Administrator
-ProvidesfullaccesstotheDVRallowingforviewingofallcamerasandmodicationtoall
settings. Use this setting with caution.
Supervisor
- Provides access to view and control all cameras, Search, Archive and modify basic settings.
Operator - Provides access to view and control all cameras. No access to Search or settings is provided.
Customized
-ProvidesaccesstothefeaturesasdenedintheAdvancedSettingsfortheuser.SeeAdv:below
for more information.
Note: It is recommended that Remote Guest Level be set to the the default “-“ to prevent unwanted access to
the DVR from outside sources.
•Adv.
For Customized access per user, press ENTER on the front panel of the DVR or on the remote control to display
the Advanced User Setup as shown in Section 6.7.1 below.