Specifications

WPS-100-DVR-8CH Installation and Users Manual

 •CALL

Press the Call button on the front panel of the DVR or the remote control to Physically Format the hard

  drive(similartoa“full”FormatoptionfoundonaPC).Aconrmationdialogboxwillbedisplayedonthe

screen. Using the front panel of the DVR or the remote, press ENTERtoconrmorESC to cancel.

Alternatively use the mouse to make these selections.

 •ESC

Press the ESC button on the front panel of the DVR or remote control to escape from this menu and

return to the main menu. Alternatively use the mouse to exit the sub menu by clicking on the “X.”

  Ifthecontentsinthismenuhavebeenmodied,aSave dialog box will be displayed requesting the

user to save the changes. Press ENTER on the front panel of the DVR or remote control to exit and save,

ESCtoexitwithoutsaving.Anothermethodtoescapeistousethemouseto“right-click”andexitthe

sub menu.

Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:

 •SIZE(GB)

The total hard drive storage capacity in GBs (gigabytes) for the Alarm Record partition and Normal

Record partition respectively.

 •ALARMRECORD(%)

Set the Alarm Record Size (in percentage) for the hard drive. Please follow the Text Input method

described in Section 4.1 to change the percentage.

Note: If the total Alarm Record partition size is zero, alarm video and audio will be recorded in Normal

Record partition.

 •NORMALRECORD(%)

Set the Normal Record Size (in percentage) for the hard drive. Please follow the Text Input method

described in Section 4.1 to change the percentage.

Note: If the total Normal Record partition size is zero, normal video and audio will be recorded in

Alarm Record partition.

6.6.2 ADVANCED HDD SETUP

The HDD Failure ActioninAdvancedHDDSetupallowstheadministratortodenehowthesystemresponds

to hard drive failure. The HDD Failure Action will be triggered if there’s no available formatted hard drive

detected.

In HDD Setup display, press SEQ on the front panel of the DVR or on the remote control to display

Advanced HDD Setup menu.