Specifications

WPS-100-DVR-8CH Installation and Users Manual

 •LOG

By default, the DVR will log when video loss is detected to the Event Log (see Section 8.2). Highlight

this setting and press ENTER or +/- to enable or disable this item. Alternatively use the mouse to

left-click on this item.

 •SCREENMESSAGE

By default, the DVR will display a video loss message in the System Status Bar when video loss is detected

for this camera. Highlight this setting and press ENTER or +/- to enable or disable this item. Alternatively

use the mouse to left-click on this item.

 •E-MAIL

  ThisDVRcansendanemailmessagetoapredenedemailaddressintheeventvideolossisdetected

for this camera. Highlight this setting and press ENTER or +/- to enable or disable this item. Alternatively

use the mouse to left-click on this item. The default setting is disabled. See Section 6.10.1 for more

information on e-mail.

 •FTP

This DVR can send the recorded video loss event for this camera to a FTP server. Highlight this setting

and press ENTER or +/- to enable or disable this item. Alternatively use the mouse to left-click on this

item. The default setting is disabled.

6.4 SEQ DISPLAY SETUP

TheSEQDisplaySetupallowstheadministratortodenethedisplayedpageswheninSEQDisplaymode.

Options include three display types:

 •1-Window

 •4-Window

 •7-Window

In the Setup Menudisplay,press▲▼◄►onthefrontpaneloftheDVRorontheremotetochangethe

highlighted option to SEQ Display, and then press ENTER to display SEQ Display Setup as shown.