Specifications
70
WPS-100-DVR-4CH Installation and Users Manual
8.3.7 VIDEO LOSS
Video Loss Setup allows the administrator to dene how the system responds when video signal is lost
for the camera.
The following is a brief description for each item in this menu and its specic operations:
• CAMERA
Select the camera to dene video loss triggered events.
• DURATION
Set the length of time the buzzer and the corresponding Alarm Out relay will remain triggered once
video loss is detected for this camera. The Buzzer and Alarm Out relay will reset immediately once
video signal is restored.
• CAMERA TO GO
This feature is not available on WPS-100-DVR-4CH.
• GOTO PRESET
This feature is not available on WPS-100-DVR-4CH.
• PRE-RECORD
Dene how much time the DVR will record before video loss is detected. The Pre Record FPS set in
Section 9.3.5 determines the frame rate of this recording.
Note: Actual pre-record time may be shorter than the value set if the total size of the pre-record video
exceeds the pre-record video buffer.
• ALARM OUT
This feature is not available on WPS-100-DVR-4CH.
• BUZZER
By default, the internal buzzer is enabled to sound when video loss for the camera is detected.
• LOG
By default, the DVR will log when video loss is detected to the Event Log.