Specifications

WPS-100-DVR-4CH Installation and Users Manual

2. Press Play (►/II, ► ►) button on the remote control to playback all the selected events.

Alternatively, use the mouse to select the Play button.

3. Press Copy ( ) button on the remote control to backup (copy) all of the selected recorded video

and audio events to the connected backup device. Alternatively, use the mouse to select the Copy

button. The Backup menu (described in the Archive portion of Section 8.6) will be displayed.

• AREA

Area dened as the motion area for the video to be searched for matching les. Use the buttons on the

remote control to highlight Area and press ENTER to display Motion Area Setting screen as shown below.

In the Motion Area Setting screen use the white mask window to dene the Smart Search area in the

same manner as setting up Motion Detection (see Section 6.2.2).

Note: The area of a video searched using Smart Search must be part of the dened area for Motion

Detection (see Section 6.2.2). Only les with motion covering all of the dened motion area will be

displayed as matching results. Therefore, based on the search algorithm, there will be more matching

les for smaller dened motion areas.

The following is a brief description for each item in this menu and its specic operations:

• ▲▼◄►

Press these buttons on the remote control to move the Mask window (grids white in color).

Alternatively, use the mouse to select and move the Mask window (grids white in color) by

“left-clicking” and dragging the mouse over the desired area.

• +/-

Press these buttons on the remote control to resize the Mask window (grids white in color).

Alternatively, use the mouse to select and move the Mask window (grids white in color) by

“left-clicking” and dragging the mouse over the desired area.

• ENTER

Press this button on the remote control to Set/Reset the area of the Mask

window (grids white in color). Alternatively, use the mouse to select the Mask icon and adjust the

Mask window (grids white in color). Once the mask area is set, the mask window will change to yellow.