Specifications

WPS-100-DVR-4CH Installation and Users Manual

To navigate and operate this menu:

• MODE

Press the Mode button on the remote control to begin searching the recorded video and audio based

on the selected search Time, Camera, and Motion Area. Alternatively, use the mouse to set the parameters

and begin the search. The search results will be displayed on the right half of the dialog box.

Note: To prevent the Smart Search feature from overloading the system, a maximum of up to 500

matched les or 200 GB of hard drive storage for each record partition will be searched based on the

start time entered.

• SEQ

Use the SEQ button on the remote control to scroll the results Page Up.

Alternatively, use the mouse to select the Page Up option.

• CALL

Use the CALL button on the remote control to scroll the results Page Down.

Alternatively, use the mouse to select the Page Down option.

• Numeric

Press the numeric buttons on the remote control followed by the ENTER button to select the display page of

the results. Alternatively, use the mouse to click the Page Number box.

• Copy ( )

Select the COPY button from the remote control to backup (copy) the selected type of recorded video

(beginning from the Search Time) to the connected backup device. The Backup menu (described in the

Archive portion of Section 8.6) will be displayed. Alternatively, use the mouse to select the COPY button.

The following is a brief description for each item in this menu and its specic operations:

• CAMERA ID

Press +/- buttons on the remote control to change the camera ID to be searched for matching les.

Altenatively use the mouse to enter the Camera ID number.

• START/END TIME

Press +/- buttons on the remote control to modify the beginning and end of the search time for the

recorded video and audio. Enter the appropriate Year, Month, Date, Hour, and Minute. Alternatively, use

the mouse to enter these parameters.

• MATCHED FILE LIST

The results of the Smart Search will be displayed in the right side of the dialog box. The les are shown

from oldest to newest and a page number is shown on the lower-left corner of the dialog box.

The user may:

1. Press the ENTER button on the remote control to select or deselect a matching event le in the results

list. Multiple events can be selected in this manner. Alternatively, use the mouse to select or

deselect each event.