Specifications

41
WPS-100-DVR-4CH Installation and Users Manual
© 2012 Wirepath Surveillance
6.5 FACTORY DEFAULT
To reset all the DVR settings to factory default values, press ▲▼◄► on the remote control to change the high-
lighted option to Factory Default and then press ENTER. Alternatively, use the mouse to select Factory Default.
Once selected, a conrmation dialog will be shown, press ENTER again to make the changes. Or select ESC, or
right-click the mouse to exit without resetting the DVR.
WARNING: All settings will be lost and replaced with factory default settings.
Settings cannot be recovered after a Factory Default.
6.10.2 FTP SETUP
FTP Setup allows the administrator to set FTP related parameters. When an event occurs and FTP is enabled for
the action, the recorded video and audio for that event will be sent to the FTP server based on the parameters
set in this menu.
In Network Setup, press ENTER to display FTP Setup as shown when the highlighted option is FTP.
To navigate and operate this menu:
• ▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an item.
Alternatively use the mouse to select an item.
• ESC
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and
return to the main menu. Alternatively use the mouse to exit the sub menu by clicking on the “X.”
If the contents in this menu have been modied, a Save dialog box will be displayed requesting the
user to save the changes. Press ENTER on the front panel of the DVR or remote control to exit and
save, ESC to exit without saving. Another method to escape is to use the mouse to “right-click,”
and exit the sub menu.
The following is a brief description for each item in this menu and its specic operations:
Please follow the Text Input method described in Section 4.1 to modify these items. Alternatively use the mouse
and the pop-up keyboard to enter these settings. Consultation with the network administrator or the FTP server
provider may be required for these settings.
• FTP SERVER
Enter the FTP Server web/IP address.
• FTP PORT
Enter the FTP Port number. The default value is 21.
• USERNAME
Enter the Username for the FTP server.
• PASSWORD
Enter the Password for the FTP server.
• PREFIX OF FILENAME
Enter the Prex of the Filenames for les sent to the FTP server. If this box is left empty, the lenames will
start with “cam” If a prex such as “Prex” is entered, the lenames will start with “Prex-cam.” For another
example, if the prex is “DVR01”, then the lenames will begin with “DVR01-cam.”