Specifications

40
WPS-100-DVR-4CH Installation and Users Manual
6.4.2 ADVANCED NETWORK SETUP
The Advanced Network Setup allows the administrator to set advanced network parameters use for
connection from remote devices such as PCs and Smart phones. Consultation with the network
administrator may be required for these settings.
In Network Setup, press ENTER to display Advanced Network Setup as shown when the highlighted
option is Adv.
To navigate and operate this menu:
• ▲▼◄►
Press these buttons on the remote control to select an item.
Alternatively, use the mouse to select an item.
• ESC
Press the ESC button on the remote control to escape from this menu and return to the main menu.
Alternatively, use the mouse to exit the sub menu by clicking on the “X.” If the contents in this menu have
been modied, a Save dialog box will be displayed requesting the user to save the changes. Press ENTER
on the remote control to exit and save, ESC to exit without saving. Another method to escape is to use the
mouse to “right-click,” and exit the sub menu.
The following is a brief description for each item in this menu and its specic operations:
Follow the Text Input method described in Section 4.1 to modify these items. Alternatively, use the mouse and
the pop-up keyboard to enter these settings. See the Router Setup document located in the support tab on
the product page for more information on Router Setup and how it relates to these settings.
• CONTROL PORT
Enter the Control Port for remote access. The default value is 67.
• DATA PORT
Enter the Data Port for remote access. The default value is 68.
• HTTP PORT
Enter the HTTP (web page) port for remote access. The default value is 80.
• WAP PICTURE QUALITY
WAP (Wireless Application Protocol) is a simple standard for remote devices (such as Smartphones) to
access the DVR. Press +/- buttons on the remote control to change the value the WAP picture quality if
WAP access will be required by remote devices. See Section 9.7 for more information on WAP.
• VIDEO STREAM
Press the +/- buttons on the remote to change the video quality sent to remote devices such as PCs and
Smartphones. Alternatively, use the mouse to change this setting. If Record is selected, the DVR will stream
video at the same resolution as the Record setting (See Section 6.1). Dual Streaming allows for remote
devices to receive lower resolution at higher speeds to the device (see Section 9.4). This is especially helpful
for remote devices on slower network. Reducing resolution sent to these devices will speed up the delivery
of the video. To enable Dual Streaming, select one of the four levels of QCIF (Fair is the lowest quality while
Superne is the highest quality). If Dual Streaming is used, the total system recording rate will be reduced.
Note: To use Dual Streaming in Internet Explorer, the user must select the Extra Video Stream option in the
Modify Menu of the Device List (See Section 9.1).
- QCIF Fair – Lowest QCIF Resolution
- QCIF Normal – Medium QCIF Resolution
- QCIF Fine – High QCIF Resolution
- QCIF Super ne – Best QCIF Resolution