Specifications

WPS-100-DVR-4CH Installation and Users Manual

• Password

If PPPoE is used, enter the Password for the system.

• DDNS Type

Starting with Version 7.75.53 a new selection will appear for WirepathDNS. It is strongly recommended that this

option is used to simplify conguration.

Using the WirepathDNS is easy. Select WirepathDNS from the list and enter the client name or other unique

string in the URL. When exiting the Network menu, conrm the changes. A DDNS service is setup automatically.

See DVR Local Display Menu Setup in Appendix E – WirepathDNS Setup for details on using WirepathDNS.

• URL

Enter the DDNS URL if DDNS is used. – Enter Client Name or System Name to identify the DVR.

• DDNS Username

Enter the DDNS Username if DDNS is used. – Not used unless an existing DDNS other than WirepathDNS service is

congured.

• DDNS Password

Enter the DDNS Password if DDNS is used. – Not used unless an existing DDNS other than WirepathDNS service is

congured.

• E-mail

Press ENTER on the front panel of the DVR or on the remote to display the E-mail Setup menu. Alternatively use

the mouse to enter this menu. Refer to Section 6.4.1 for details.

• FTP

Press ENTER on the front panel of the DVR or on the remote to display the FTP Setup menu. Alternatively use the

mouse to enter this menu. Refer to Section 6.4.3 for details.

• ADV.

Press ENTER on the front panel of the DVR or on the remote to display the Advanced Network Setup menu.

Alternatively use the mouse to enter this menu. Refer to Section 6.4.2 for details.

6.4.1 E-MAIL SETUP

The E-mail Setup allows the administrator to set E-mail related parameters. When an event occurs and E-mail is

enabled for the corresponding action, an e-mail will be sent based on the parameters set in this menu.

In Network Setup, press ENTER to display E-mail Setup as shown when the highlighted option is E-mail.