Specifications

WPS-100-DVR-4CH Installation and Users Manual

6.4 NETWORK SETUP

The Network Setup allows the administrator to setup all Ethernet network related parameters. Consultation with

the network administrator may be required to set these parameters correctly.

In the Setup Menu display, press ▲▼◄► on the front panel of the DVR or on the remote to change the high-

lighted option to Network, and then press ENTER to display Network Setup as shown.

To navigate and operate this menu:

• ▲▼◄►

Press these buttons on the front panel of the DVR or remote control to select an item.

Alternatively use the mouse to select an item.

• ESC

Press the ESC button on the front panel of the DVR or remote control to escape from this menu and return to the

main menu. Alternatively use the mouse to exit the sub menu by clicking on the “X.” If the contents in this menu

have been modied, a Save dialog box will be displayed requesting the user to save the changes. Press ENTER

on the front panel of the DVR or remote control to exit and save, ESC to exit without saving. Another method to

escape is to use the mouse to “right-click” and exit the sub menu.

The following is a brief description for each item in the sub menu and its specic operations.

Please follow the Text Input method described in Section 4.1 to modify these items. Alternatively use the mouse

and the pop-up keyboard to enter these settings. Consultation with the network administrator may be required

for these settings.

• Net Type

Press +/- buttons on the front panel of the DVR or on the remote control to change the Net Type. Alternatively

use the mouse to change this setting. Options include: Static IP, PPPoE, or DHCP. DHCP can only be used for

intranet (LAN) access, while Static IP and PPPoE can be used for both internet & intranet access. The default

setting is DHCP.

• IP Address

Enter an Ethernet IP Address for the DVR. This address should be static and not conict with any other IP address

on the LAN.

• Net Mask

Enter the Net Mask for the IP address.

• Gateway

Enter the Gateway IP address for the system.

• DNS

If using DNS, enter the Domain Name Server address for the system. (Same address as Default Gateway)