Specifications

35
WPS-100-DVR-4CH Installation and Users Manual
© 2012 Wirepath Surveillance
6.3 SYSTEM SETUP
The System Setup allows the administrator to set the system time, time zone, time synchronization, language,
etc.
In the Setup Menu display, press ▲▼◄► on the remote to change the highlighted option to System, and then
press ENTER to display System Setup as shown.
To navigate and operate this menu:
• ▲▼◄►
Press these buttons on the remote control to select an item.
Alternatively, use the mouse to select an item.
• ESC
Press the ESC button on the remote control to escape from this menu and return to the main menu.
Alternatively, use the mouse to exit the sub menu by clicking on the “X.” If the contents in this menu have
been modied, a Save dialog box will be displayed requesting the user to save the changes.
Press ENTER on the remote control to exit and save, ESC to exit without saving.
Another method to escape is to use the mouse to “right-click” and exit the sub menu.
The following is a brief description for each item in this menu and its specic operations:
• TIME ZONE
Press the +/- buttons on the remote control to select the appropriate
time zone. Alternatively, use the mouse to select the time zone.
The default setting is Eastern Standard Time.
• DAYLIGHT SAVING TIME
Press ENTER or +/- on the remote control to enable or disable this item.
Alternatively, use the mouse to enable or disable this feature.
• SYSTEM TIME
- Synchronization
Press ENTER or +/- buttons on the remote control to enable or disable time synchronized with a TSP
Server. Alternatively, use the mouse to enable or disable this feature. The default setting is disabled.
- TSP Server
If Time Synchronization is enabled, select a TSP (Time Synchronization Protocol) Server. The DVR will
synchronize with the specied TSP server at the system preset interval. Follow the Text Input
method described in Section 4.1 to modify this setting. Alternatively, use the mouse and the pop-up
keyboard to enter the TSP server.