Specifications
29
WPS-100-DVR-4CH Installation and Users Manual
© 2012 Wirepath Surveillance
• SEQ / CALL
Press these buttons on the front panel of the DVR or remote control to decrease (SEQ) or
increase (CALL) the Sensitivity of the motion detection area of this camera from 1 - 10 (1 is least
sensitive and 10 is most sensitive). Alternatively use the mouse to select this icon and adjust the
sensitivity. We recommend that the default setting (3) be used to start and adjusted as needed.
• Volume +/- ( +)
Press these buttons on the remote control to increase or decrease the number of grids required
to detect motion before the DVR will trigger motion detection recording and any associated
events. Alternatively, use the mouse to select this icon and adjust the number of grids.
• SEARCH
Press this button on the remote control to test the motion detection of this camera. Grids in green
indicate that area that will detect motion. When motion is detected, these grids will change in
color to red. Press this button again to exit testing. Alternatively, use the mouse to select this icon
to enter and exit testing mode.
• ESC
Press the ESC button on the remote control to escape from this menu and return to the main
menu. Alternatively, use the mouse to exit the sub menu by clicking on the “X.”
If the contents in this menu have been modied, a Save dialog box will be displayed requesting
the user to save the changes. Press ENTER on the remote control to exit and save, ESC to exit
without saving. Another method to escape is to use the mouse to “right-click,” and exit
the sub menu.