Specifications

WPS-100-DVR-4CH Installation and Users Manual

• NUMERIC

Press these buttons on the remote control to change the camera.

Alternatively, use the mouse to select the desired camera.

• MODE

Press this button on the remote control to restore Brightness, Contrast, Hue and

Saturation values. Alternatively, use the mouse to click on the Factory Reset button.

• ESC

Press the ESC button on the remote control to escape from this menu and return to the main Menu display.

Alternatively, use the mouse to exit the sub menu by clicking on the “X.” If the contents in this menu have

been modied, a Save dialog box will be displayed requesting the user to save the changes. Press ENTER

on the remote control to exit and save, ESC to exit without saving. Another method to escape is to use the

mouse to “right-click,” and exit the sub menu.

5.3 BACKUP DEVICE

The Backup Device menu allows for backup and restoral of the DVR’s conguration to or from a USB device.

This DVR supports a variety of USB 2.0 storage devices including thumb drives and DVD drives.

Once in the main Menu display, press ▲▼◄► on the remote control to select Backup Device, and then press

ENTER to display the menu as shown. Alternatively, use the mouse to click on the Backup Device icon.

Note: It is highly recommended to make a backup of the conguration once complete. Keep a copy of

this backup in a secure location for future use. When setting up multiple DVRs with similar congurations,

this feature could also be used to create a “template” le to speed the setup process.

To navigate and operate this menu:

• ▲▼◄►