Specifications

18
WPS-100-DVR-4CH Installation and Users Manual
5.2 DISPLAY
The VGA Display menus allows for adjustment to the VGA output of the DVR.
Once in the Main Menu display, press ▲▼◄► on the remote control to select VGA Display and then press
ENTER to display the menu as shown. Alternatively, use the mouse to click on the VGA Display icon.
Use the operations listed below to adjust Resolution, Brightness, Contrast, Hue, and Saturation.
Warning – Be sure the connected VGA monitor can accept the desired resolution before selecting it. If a
resolution is selected that is not supported by the monitor and video is lost at the VGA monitor, continue to
use the +/- buttons on the remote control to select a setting that is supported.
Another option would be to temporarily connect a composite video monitor to the Video Out BNC to
properly set the VGA resolution.
• ▲▼◄►
Press these buttons on the remote control to select an item.
Alternatively, use the mouse to select an item.
• +/-
Press these buttons on the remote control to change the settings.
Alternatively, use the mouse to make these changes.