Specifications

WPS-100-DVR-4CH Installation and Users Manual

• OSD

Use the mouse to select the OSD Display icon to enable or disable the following information from

appearing in the System Status Bar on the main display; Title, Time, Messages, Status and Rec%.

• COPY

Press this button on the remote control to display the Search menu and then

copy recorded video to the storage device connected to the USB port.

• TRANSPORT CONTROLS

Use the Transport buttons on the remote control during playback to control

the video. Alternatively, use the mouse to click on these icons.

• FAST/SLOW

Use the mouse to select this icon to toggle the speed of the forward and backward transport buttons.

• PLAY/PAUSE

Press this button on the remote control to launch the Instant Playback menu

to playback the last 30 seconds or 1, 2, 3 or 5 minutes of video.

Alternatively, use the mouse to click on this icon.

4.4 DIGITAL ZOOM

The DVR supports X2 and X4 Digital Zoom. Use this function in full window display mode. Press the X2 button

on the remote control to enter Digital Zoom. Alternatively, use the mouse to select the icon ( )found in the

Control Bar. A yellow zoom window will be displayed in the video window as shown.

• X2 AND ENTER

Use the buttons on the remote control to

zoom from X1 to X2. Pressing the X2

button again followed by ENTER button will

zoom to X4. Pressing the X2 button

followed by ENTER a third time will return the

zoom to normal X1 view.

• ▲▼◄►

Use these buttons on the remote control to

move the zoom window.

• ESC

Use the ESC button on the remote control

to escape from Digital Zoom mode and

return to the normal full screen display.

Alternatively, use the mouse to select the

exit button or simply “right-click.”