Specifications

WPS-100-DVR-4CH Installation and Users Manual

4.2 LOGIN / LOGOUT

There are three password levels in the system; Administrator (highest), Supervisor, and Operator (lowest). If the

user does not login to the system, the user will be treated as a Guest and can only view live video display.

The system allows up to 18 user accounts. The Administrator can set up the login name and password for each

user (please refer to Section 6.7 for Password Setup) and has access to all features. The Supervisor can operate

the live video display, video playback and archive. The Operator can only operate the live video display.

To login or logout of the system, press

the MENU button on the remote control and

then use the arrow buttons to select the

desired option. Once the option is highlighted,

press the ENTER button. Alternatively, use the

mouse by rst right-clicking the mouse to display

the main MENU and then select the LOGIN icon.

In Login/Logout menu, follow the text input method described in Section 4.1 to enter the Login name and

Password. Once the name and password are entered, press ▲▼ to highlight and select the Login option. Press

ENTER to login the system. To logout of the system, rst display the Login/Logout menu and the press ▲▼ to

highlight and select Logout option, and then press ENTER. Use the ESC button on the remote control to exit with-

out making changes. Alternatively, use the mouse to select the exit button or simply “right-click.”

FACTORY PRESET ADMINISTRATOR LEVEL LOGIN

4.3 BASIC OPERATIONS USING THE CONTROL BAR

After logging into the system, use the supplied mouse to operate the DVR. A Control Bar will be displayed at

the bottom of the display by “dragging” the mouse to the bottom screen. It is recommended to operate the

Control Bar using the included mouse. Where applicable, buttons on the remote control are indicated in the

descriptions below.

The following is a brief description for each item in the menu and its specic operations:

• NUMERIC

Select any camera from the remote control by using the numeric buttons. Only buttons 1-9 are available

on the 9 channel DVR; all 16 are available on the 16 channel DVR. Alternatively, use the mouse to select

any of these icons to switch to the full-window display of a particular camera.