Specifications

WPS-100-DVR-4CH Installation and Users Manual

4. MAIN SCREEN AND BASIC OPERATIONS

The following sections (Sections 4-6) relate to the display output from the VGA or BNC connection.

For operation using an Internet Explorer web browser see Section 8.

The 4-Window split screen, as shown above, is the main screen displayed after system startup. 1-Window, 4-Window

(as described in Section 5.7). In addition to the split window, a System Status Bar is displayed at the bottom of the

screen. Time is displayed in the lower-left corner while system status is displayed in the lower-right corner. Scrolling

screen messages are displayed when certain events occur.

The System Status Bar offers the following information:

• SEQ display– SEQ icon shown for SEQ display ON

• Backup state – Backup icon shown for backup

• Manual record - REC icon shown for ON,

• Zoom states – X2, or X4

• Mute state – Speaker icon visible when not muted; the icon will not be displayed in mute state

• Hard Drive recording percentage

• Video Loss - a message with the corresponding camera number scrolls from right to left

• Motion Detection- a message with the corresponding camera number scrolls from right to left

• Current date and time

In the top left of each camera the following information is displayed:

• Camera Title – name of the camera

• Recording icon – indicates video is being recorded

• Motion icon – indicates motion detected for this camera

In split screen windows, the “focus” camera is indicated by a green or red box around the camera’s title.

Green indicates live video, and red indicates recorded video that is being played back.