User manual

36
4.9.4 Spot Setup
The DVR has two modes of video output; one is the main video output, the other is spot
video output. SPOT setup is for controlling orders of channels that the system cycles
through in SPOT mode. User can monitor every channel in the SPOT mode.
Item Description
Auto-Seq. Interval (Seconds)
The duration interval time between channels is in seconds
under SPOT mode (1~999 seconds).
Enable Spot
When setting “Enable Spot”, the “MAIN/SPOT” BNC terminal
will be confined/restricted to Spot output port only.
Skip Video Loss Channel
Whether to skip channels without video signal.
Channels
Select which channels will be displayed in the sequence.